10 Grasshopper-Shaped Wooden Planter Ideas for Garden Borders

A grasshopper planter uses a long body trough, folded wings, and simplified angular hind legs. These concepts compare compact pots, slatted herbs, removable liners, geometric panels, twin containers, trailing flowers, and large grass displays.

10 grasshopper-shaped wooden planter designs

Classic Cedar Grasshopper

The complete three-quarter view makes the silhouette, flower capacity, ground contact, and drainage route easy to compare. The concept uses a long low body, folded wing panels, simplified braced hind legs, removable liner, and broad platform base.

Build check: Confirm four-point floor contact or a continuous base before loading the planter.

Compact Succulent Grasshopper

This compact interpretation favors a smaller footprint, low center of gravity, and removable nursery pot. The concept uses a long low body, folded wing panels, simplified braced hind legs, removable liner, and broad platform base.

Build check: Mock up the footprint with the actual pots and preserve a clear walking route.

Slatted Herb-Trough Grasshopper

Slatted cedar construction keeps the form readable while leaving practical access to the planting trough. The concept uses a long low body, folded wing panels, simplified braced hind legs, removable liner, and broad platform base.

Build check: Lift the liner out with gloved hands and verify an unobstructed drainage path.

Grasshopper with Galvanized Liner

A removable metal-look liner separates wet growing media from the decorative wooden body. The concept uses a long low body, folded wing panels, simplified braced hind legs, removable liner, and broad platform base.

Build check: Use full-size templates for paired silhouette panels so both sides align.

Modern Geometric Grasshopper

Simplified geometric panels turn the wildlife silhouette into repeatable parts over a concealed support frame. The concept uses a long low body, folded wing panels, simplified braced hind legs, removable liner, and broad platform base.

Build check: Test finish colors on offcuts and keep coatings compatible with outdoor use.

Two-Tone Cedar Grasshopper

Contrasting wood tones clarify the body, wings, markings, or structural accents without printed decoration. The concept uses a long low body, folded wing panels, simplified braced hind legs, removable liner, and broad platform base.

Build check: Support the liner on rails or a tray rather than on thin decorative panels.

Weathered Cottage Grasshopper

Weathered surfaces suit a cottage setting when end grain, joints, and feet still receive proper protection. The concept uses a long low body, folded wing panels, simplified braced hind legs, removable liner, and broad platform base.

Build check: Trace the wet load through rails, legs, joints, fasteners, and into the ground.

Grasshopper with Twin Flower Pots

Multiple containers remain individually removable for watering, cleaning, drainage, and seasonal changes. The concept uses a long low body, folded wing panels, simplified braced hind legs, removable liner, and broad platform base.

Build check: Protect end grain, preserve ventilation gaps, and avoid hidden water pockets.

Trailing-Flower Grasshopper

Trailing flowers soften the outline while the wet load remains centered over the broad base. The concept uses a long low body, folded wing panels, simplified braced hind legs, removable liner, and broad platform base.

Build check: Check tipping in the least favorable direction with the planter fully saturated.

Large Grass-Filled Grasshopper

The larger ornamental-grass version preserves a deep serviceable liner and a stable load path. The concept uses a long low body, folded wing panels, simplified braced hind legs, removable liner, and broad platform base.

Build check: Recheck sharp edges, exposed hardware, drainage, and replaceable wear parts.

Plan the frame, liner, and drainage

Start with the real pots and their saturated weight. Build a simple internal tray or rail frame that transfers this load directly to broad legs or base runners. Add the animal silhouette afterward as removable or replaceable decorative panels where practical.

Keep untreated end grain above paving and soil, slope caps that might hold water, and leave ventilation around hidden liners. Overflow should leave the planter without running through joints or collecting inside a closed wooden body.

Planning checklist

• Mock up the footprint and confirm comfortable walking, mowing, gate, and hose clearance.
• Size the legs, rails, base, joints, and fasteners for every pot, liner, plant, and saturated growing medium.
• Keep nursery pots or a removable liner separate from the decorative wood body, with an unobstructed drainage route.
• Ease exposed wings, beaks, legs, antennae, tails, and silhouette edges; recess sharp hardware.
• Use exterior-rated fasteners and a finish compatible with the wood species, plants, soil exposure, pets, and maintenance routine.
• Raise end grain above standing water and make liners, trays, feet, and other high-wear parts replaceable.

Frequently asked questions

Can I build directly from these images?

No. The images are original planning inspiration, not measured drawings. Prepare a dimensioned plan, cut list, drainage detail, joinery schedule, and stability check before building.

Which wood works well for an outdoor wildlife planter?

Cedar and other naturally durable species are common choices. Exposure, ground contact, finish, fastener compatibility, maintenance, and local availability should control the final selection.

How do I protect the wooden body from wet soil?

Use removable nursery pots or a serviceable liner supported by an internal tray. Preserve drainage and ventilation, and keep overflow from collecting inside closed wooden cavities.

More wooden animal planter ideas

• 10 Hummingbird-Shaped Wooden Planter Ideas for Flower Gardens
• 10 Robin-Shaped Wooden Planter Ideas for Cottage Gardens
• 10 Cardinal-Shaped Wooden Planter Ideas for Bright Gardens
• 10 Woodpecker-Shaped Wooden Planter Ideas for Woodland Gardens